![]() In my case I had to flash the correct ME firmware with FWUpdLcl64, ignored the size mismatch, lot of program lines. Reboot.Ĭheck if manufacture mode 2 of 10 message is gone, and only not in committed state is left. Open wndmifit from the 2.10 folder, and fill in the data, press commit, if al ok you can lock the mpm with running the lockmpm batch file. Place the chip in the laptop and boot, it will turn off and on a couple of times and will complain about serial sku and so on, you have to safe the actual data (serial sku ct and so on) before, it should be also on you’re laptop, but copy paste is more easy. Before write unplug usb and insert it again, -push write. You need a programmer I have bought the ch341a and used v1.18 software.ĪLWAYS safe you’re verified! files and do erase and verify!. Solution is use a fresh bios with a unlocked descriptor*, brand it and done :) i am not a expert it was a training on the job. This is the first time doing this stuff but here we go. So that explains why I had to update the ME AND get size error, but after that all was OK ![]() ![]() I later found that: Provides updates for L77 ROM for Entry Management Engine (ME) systems, and L78 ROM for Full Management Engine (ME) systems. ![]() Because i get the base (empty ) rom from my supplier with L77 I did some transfer in it to make it L78, that went ok but is not how you should do it, that's is why i get some differences I guess.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |